How to spray chrome effect powder coating

1.Top coats are transparent.

2.The color and brightness of the substrate (surface) under a top coat will affect the finished appearance. To achieve results similar to the S panel image, the top coat must be applied over a bright silver substrate.

3.Super Chrome can be used as a base coat to simulate the appearance of a chrome-like substrate when one is not present. As always, shoot a test piece first to determine if your desired results will be achieved.

First step

Second step

Third step

Your substrate must be clean and bright. If not, you can also choose an electroplated silver as the primer to make the substrate look good

The finish paint is a Candy Color with high brightness, which will reveal the bright substrate below to achieve the desired effect

Top coats are transparent.

Finally, you need to cover the surface with a layer of transparent powder to achieve the effect of protective coating, and it can make the product surface look brighter

According to resin type,Our products can be divided into Epoxy Powder Coating,Polyester Powder Coating,Hybrid Powder Coating.Each resin type can have different gloss,such as High Gloss Powder Paint,Flat Gloss Powder Paint,Semi-Gloss Powder Paint,Matte Powder Paint.